http://www.buildcollective.net
February 9th, 2012

2012 new place new methods

The new year started right with a small project at the wild coast in the eastern cape province. The donated container finally arrived and construction on the temporary workshop unit started.

Climate conditions differ much from Johannesburg but buildCollective approach stays the same.
As the hot and humid climate at the exposed site does not necessarily suit the light-clay and less insulation capacity but rather cooling qualities are needed we looked at some buildings in the area.

To stay green, easy and fast to build and provide protective cooling qualities we adopted the traditional construction of woven branches filled with earth. Three 200 by 70 Pillars were casted, hessian (jute) and welding mesh were tightened around them, connected with wire and filled up with earth. A new self-produced truss was created – timber with bended flatsteel , much lighter and easy to join and rejoin.

A small team of three people of the neighbourhood joint the experimental workshop construction and were excited by the strength of the wall. After filling the wall got an ordinary plaster job by the local team.

August 9th, 2011

plastering workshop with Japanese expert

+++++plaster expert Tatsuya Tokura from japan! ++++++++ (arrigato, kampaii and others…) +++++replaster the classroom and library made by the University of Slovenia inside and outside as well preparing mixes for the primary classroom of the FH Carinthia++++++practical students, team from the community++++++

++++++most suitable clay in town++++++ different mixes in different colours+++++ traditional South African clay construction methods +++++mix proportions for different layers to plaster the straw-light-clay walls ++++++++++ red sand, clay, lime (whitewash), small straw and some cement.+++++++ Inside the classroom yellow sand and more lime to get a light colour++++++++++ left out the cement and chicken wire as lathwork at all and used red clay, sand, whitewash, straw and jute as plaster reinforcement to fully keep thermal and constructive advantages of the light-clay.++++++

+++++++++++japanese accurateness, good tools ++++++++++ starting with the corners to avoid cracks+++++++ layers with different mixes, patient drying process and straight edges to continuously floating and brushing at the end to get the famous shiny topping.

April 13th, 2011

2011 a good year so far

+++++Back to south – very busy +++++ Carinthia University of Applied Science classroom for grade one built in just 8 weeks+++++ the local team from construction to catering. +++++ side projects with the little ones ++++++ state of the art at the Ithuba Community College++++self produced pillars and trusses filled with light-straw-clay++++++

+++++++++ http://www.schap.co.at

October 30th, 2010

modular, easy, green,….

October 11th, 2010

build!

September 29th, 2010

concrete

++++self produced concrete pillars are up +++++ Ithuba workshop unit as first training object of the modular construction method.++++

September 20th, 2010

adopt in action

+++++ start of the workshop unit

+++++second clay mixer machine ++++pillar machine for the loadbaring modular system (concrete pillar and rooftrusses) to experiment and prefabricate for Extensions and Houses.++++

September 7th, 2010

……

++++ Ithuba Skills College , a new sewer system, ecc. (formwork, concrete, plumbing)++++

+++building Classrooms with voluntary students from Kunstuniversity Linz and University of Slovenia  - steeltrusses and clay straw walls+++++

August 22nd, 2010

….

++++progress on the container WELDING ++++ inside it is allready a workshop, kitchen and office++++++ongoing clay straw workshop for the advanced local participants is experimenting on plaster mixtures++++collaboration with kunstuniversität linz on classroom+++++



August 14th, 2010

.

++Magaula Clay mine has been established as local ressource of building material++






++container converting into a site office, kitchen and workshop space. +++


+++The first workshop unit started on metall – cutting and welding to prefabricate the trusses for the communal building++++

This work is licensed under GPL - 2009 | Powered by Wordpress using the theme aav1